All Hotfix Fabric® is in stock and will ship within 24 hours of your online order. Please note we are closed and do not ship Saturdays or Sundays.
Your order will either be shipped via USPS or FedEx Ground depending on the size of the order. When the order is shipped out you will receive an e-mail with tracking information so you can track the package.
We do not allow returns.
You can cut your Hotfix Fabric® with a laser cutter, plotter cutter, or die cutting machine such as an Accucut or Sizzix. If you don't have any of this equipment you can even use a pair of scissors.
Below are starting points for some of the most popular cutters. You may need to adjust the blade, speed and force depending on the cutter and sharpness of the blade. Please keep in mind that there are too many cutters for us to list them all, but the below information is a great starting point.
!!YOU MUST HAVE A STRONG GRIP CUTTING MAT!!
Cricut: Set the cutter to custom and choose the setting felt with backing.
Cameo: Speed: 3 Thickness:40 and Blade: 8
Lace: Knife Depth about 1.0mm out of the holder, Speed to 10 and force at 25-27 CBU-15-45 blade
Fabric: Knife depth about 1.5mm out of the holder, Speed to 5 and Force at 30 with CBU-09 Blade.
Roland GX-24: Use a 60 blade with 120 down pressure speed 10. (this is a starting point some have used a 45 blade and more pressure.)
You want to put the white release paper down on the Strong Sticky Mat - Fabric Up.
Laser cutter: Each laser is different but you will find that it does not take much power and the speed is medium.
Once you have cut out your desired design, peel the white backing off, and place the design, adhesive side down, onto your material. If ironing lace, please use parchment paper to protect your iron from the adhesive that can seep through the netting of the lace. Iron setting should be set to cotton, please do not use steam. Please use caution as the iron is extremely hot. Iron directly onto the lace using firm pressure for 45 seconds or until adhesive has melted. Pressing instructions are to be used with most fabrics (excluding spandex.).
Once the lace or fabric is applied it can be washed in the washing machine and we recommend hanging to dry.
Yes, we do Custom work. We have a 12 piece minimum to laser cut your Custom Applique kit. We ask you to submit a Custom Request Form at this link: www.hotfixfabric.com/custom. Once we receive your form, we will email you your quote. You have the option to choose from our selection of Hotfix Fabric® for your kits or send us your fabric to apply Hotfix Fabric® Adhesive. If you are sending us your fabric we will let you know how much yardage we will need to complete your job when we email your quote.
Yes, we will apply our Hotfix Fabric Adhesive® to your fabric. There is a 5 yard minimum. The cost is $8.95 per yard. If you would like us to apply our Hotfix Fabric® Adhesive and cut your fabric into sheets the total cost would be $10.95 per yard.